FIND YOUR TRAILER
FEATURED
MEET THE 30GTS
Gooseneck | 5’ Stationary | 26’ Tilt Deck
SPECS↓
GVWR 41,600 lbs
Capacity (Distributed) 32,140 lbs
Base Trailer Weight 9,460 lbs
Frame Construction 8" x 4" Tubular Subframe with High Tensile Perimeter rails
Crossmembers 4" x 2” Tubular Crossmembers on 16” Centers
Hitch 2 - 5/16” Gooseneck Coupler, 30,000 lb Capacity
Landing Gear 12,000 lb Capacity with Drop Foot
Safety Chains Qty 2 - 3/8" x 36" Grade 70 High Tensile Strength with Slip Hooks and Safety Latches
Deck Latch Over-Center Slider Shaft Latch with Tension Adjuster and Safety Pin
Cushion Cylinder 4" x 16" with Metered Flow to Cushion Loading and Unloading
Load Securement 18 Each (9 per side) 2-way Chain Slot/Stake Pocket System | 14 Each (7 per side) 1" Diameter D-Rings
Tool Compartment In Upper Gooseneck with Lockable Lid
Axles Qty 2 – 16,000 lb Capacity
Hubs Oil Bath Type, 8 on 275mm Bolt Circle with M22 Lug Nuts
Brakes 12-1/4" x 5" Electric Brakes both Axles with 12 Volt Sealed Breakaway System
Suspension 3-Point Spring with Axle Alignment Capability
Wheels 17.5" x 6.75" 8 on 275mm Bolt Pattern
Tires ST215/75R 17.5 Radial Load Range H
Finished Preparation Sandblast
Finish Coating Powder Coat with Zinc Primer
Electrical Philips Sealed Harness System with Rubber Isolated LED Lighting
Decking 2” Rough Surface No.1 Grade Fir with Fasteners at all Crossmembers
Decking Width 102”